Jump to content
ElementaryOS France
  • 0

Reconnaissance carte SD

Asked by Pascal148 ,

 Share

Question

Newbie

Pascal148

Posted
Posted

Bonjour,

 

Je viens d'installer la version Luna avec un noyau 3.2.0.57 sur un HP Touchsmart 11, j'en suis très satisfait car la distribution se démarque des autres mais j'ai un problème de reconnaissance de carte SD.

J'ai bien vu que les périphériques USB n'étaients pas montés automatiquement et je monte sans problème une clé USB avec le gestionnaire de fichiers.

En revanche, il ne reconnaît pas les cartes SD. J'ai essayé avec plusieurs cartes et il ne se passe rien dans le gestionnaire de fichiers.

Cela ne vient pas de l'ordinateur car j'ai une Ubuntu à côté qui reconnaît la carte sans problème.

Est-ce que quelqu'un a déjà rencontré ce problème et a une solution a proposé ?

 

Merci d'avance.

 

Pascal

Link to comment
Share on other sites

10 answers to this question

Recommended Posts

  • 0
Newbie

Pascal148

Posted
  • Author
Posted (edited)

Bonsoir,

 

Voici le résultat de lspci:

00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1536
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9834
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9840
00:02.0 Host bridge: Advanced Micro Devices [AMD] Device 1538
00:02.3 PCI bridge: Advanced Micro Devices [AMD] Device 1439
00:02.4 PCI bridge: Advanced Micro Devices [AMD] Device 1439
00:02.5 PCI bridge: Advanced Micro Devices [AMD] Device 1439
00:10.0 USB controller: Advanced Micro Devices [AMD] Device 7814 (rev 01)
00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] Device 7813 (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Device 1530
00:18.1 Host bridge: Advanced Micro Devices [AMD] Device 1531
00:18.2 Host bridge: Advanced Micro Devices [AMD] Device 1532
00:18.3 Host bridge: Advanced Micro Devices [AMD] Device 1533
00:18.4 Host bridge: Advanced Micro Devices [AMD] Device 1534
00:18.5 Host bridge: Advanced Micro Devices [AMD] Device 1535
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
02:00.0 Network controller: Ralink corp. Device 3290
02:00.1 Bluetooth: Ralink corp. Device 3298
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01)

 

Il n'y a aucun message dans kern.log comme s'il ne détectait pas le périphérique. J'ai par ailleurs vérifié que cela marchait sous Ubuntu.

En regardant sur Google (http://openbenchmarking.org/linux/pci/0805/1022:7813) et essayé 'sudo modprobe sdhci-pci' mais cela ne change rien.

 

Merci d'avance.

Edited by Nikos
Link to comment
Share on other sites
  • 0
Newbie

Pascal148

Posted
  • Author
Posted (edited)

Bonsoir,

 

Le voici:

 

 

00:00.0 Host bridge: Advanced Micro Devices [AMD] Device 1536
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9834 (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 79
Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
Region 4: I/O ports at 3000 [size=256]
Region 5: Memory at f0c00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at f0c60000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx

00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9840
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 77
Region 0: Memory at f0c40000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:02.0 Host bridge: Advanced Micro Devices [AMD] Device 1538
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.3 PCI bridge: Advanced Micro Devices [AMD] Device 1439 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0b00000-f0bfffff
Prefetchable memory behind bridge: 00000000f0800000-00000000f08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:02.4 PCI bridge: Advanced Micro Devices [AMD] Device 1439 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f0a00000-f0afffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:02.5 PCI bridge: Advanced Micro Devices [AMD] Device 1439 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f0900000-f09fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
	PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp

00:10.0 USB controller: Advanced Micro Devices [AMD] Device 7814 (rev 01) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0c48000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd

00:11.0 SATA controller: Advanced Micro Devices [AMD] Hudson SATA Controller [AHCI mode] (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 72
Region 0: I/O ports at 3118 [size=8]
Region 1: I/O ports at 3124 [size=4]
Region 2: I/O ports at 3110 [size=8]
Region 3: I/O ports at 3120 [size=4]
Region 4: I/O ports at 3100 [size=16]
Region 5: Memory at f0c4f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci

00:12.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 39) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0c4e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:12.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 39) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0c4d000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:13.0 USB controller: Advanced Micro Devices [AMD] Hudson USB OHCI Controller (rev 39) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0c4c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd

00:13.2 USB controller: Advanced Micro Devices [AMD] Hudson USB EHCI Controller (rev 39) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f0c4b000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:14.0 SMBus: Advanced Micro Devices [AMD] Hudson SMBus Controller (rev 3a)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: i2c-piix4

00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 02)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 78
Region 0: Memory at f0c44000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd-hda-intel

00:14.3 ISA bridge: Advanced Micro Devices [AMD] Hudson LPC Bridge (rev 11)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:14.7 SD Host controller: Advanced Micro Devices [AMD] Device 7813 (rev 01) (prog-if 01)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 39, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0c4a000 (64-bit, non-prefetchable) [size=256]
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

00:18.0 Host bridge: Advanced Micro Devices [AMD] Device 1530
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge: Advanced Micro Devices [AMD] Device 1531
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] Device 1532
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] Device 1533
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>

00:18.4 Host bridge: Advanced Micro Devices [AMD] Device 1534
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
Kernel modules: fam15h_power

00:18.5 Host bridge: Advanced Micro Devices [AMD] Device 1535
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 76
Region 0: I/O ports at 2000 [size=256]
Region 2: Memory at f0b00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0800000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169

02:00.0 Network controller: Ralink corp. Device 3290
Subsystem: Hewlett-Packard Company Device 18ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f0a10000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2860
Kernel modules: rt3290sta

02:00.1 Bluetooth: Ralink corp. Device 3298
Subsystem: Hewlett-Packard Company Device 18ec
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 3
Region 0: Memory at f0a00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>

03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01)
Subsystem: Hewlett-Packard Company Device 2178
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f0900000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>

 

Merci d'avance.

Edited by Nikos
Link to comment
Share on other sites
  • 0
Newbie

Pascal148

Posted
  • Author
Posted

J'ai oublié de préciser que le module sdhci_pci est chargé.

 

Voici ce que m'indique lsmod

 

sdhci_pci 18826 0

sdhci 33205 1 sdhci_pci

 

Il n'y a rien a priori non plus dans dmesg ni syslog.

 

Je découvre cette distribution.

Est-ce que je peux faire un apt-get udpate et apt-get dist-upgrade ?

 

Merci d'avance.

Link to comment
Share on other sites
  • 0
Newbie

getsugah

Posted
Posted

alors, sur les dérivées de debian, le "update" permet de rafraichire la nouvelle liste des paquets dispo sur les serveurs, cette commande ne modifie en rien le système.

la cmd "upgrade" télécharge et install les paquets plus récent que ceux dont tu dispose.

la cmd "dist-upgrade" permet si le sources.list est bien renseigné de passer par ex de la version X a Y, en gros cette commande te change de version de système.

 

pour la SD, que te dit "dmesg | grep sd" quand tu inserts la carte?

 

sinon si la carte est formaté en Exfat http://doc.ubuntu-fr.org/exfat

Link to comment
Share on other sites
  • 0
Newbie

Pascal148

Posted
  • Author
Posted

Oui, je connais ces commandes mais ce que je crains c'est de mettre le bazar dans les paquets.

Sinon, dmesg ne dit rien. En voici le résultat après un reboot et insertion de la carte:

 

[ 1.759153] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)

[ 1.759187] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1.759405] sd 0:0:0:0: [sda] Write Protect is off

[ 1.759414] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.759482] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.761759] sda: sda1 sda2 sda3 sda4

[ 1.762889] sd 0:0:0:0: [sda] Attached SCSI disk

[ 2.127004] sdhci: Secure Digital Host Controller Interface driver

[ 2.127013] sdhci: Copyright© Pierre Ossman

[ 2.127835] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)

[ 2.127885] sdhci-pci 0000:00:14.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 3.872219] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)

[ 4.302326] Adding 3906556k swap on /dev/sda4. Priority:-1 extents:1 across:3906556k SS

[ 4.792257] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro

[ 5.136978] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)

[ 5.769191] type=1400 audit(1388700901.820:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=646 comm="apparmor_parser"

 

La carte est en ext4 et elle est reconnue sur la même machine sous Ubuntu 12.04 LTS.

C'est un véritable mystère.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to question listing
×
×
  • Create New...