Jump to content
ElementaryOS France
  • 0

probleme wifi


 Share

Question

Bonjour,

suite a l'achat un nouveau Pc Portable j'ai pris la décission de retirer windows 10 et installer elementary OS 0.3.2 Freya (64-bit)

tout fonctionne normalement sauf une chose la wifi j'ai beau chercher sur le net pas reponse hors jai une wifi integrer dans ce portable

peut ton m'aider a resoudre ce probleme car je suis toujours connecter avec  un cable erthenet 

 

Acer aspire E15   E5-573G-P2J4

 

Cordialement.

Link to comment
Share on other sites

6 answers to this question

Recommended Posts

  • 0

voila ce que vous m'avez demandez

 

root@bonneau-Aspire-E5-573G:~# lsusb
Bus 003 Device 002: ID 8087:8001 Intel Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 005: ID 1bcf:2c81 Sunplus Innovation Technology Inc. 
Bus 001 Device 004: ID 0489:e09c Foxconn / Hon Hai 
Bus 001 Device 011: ID 0000:0538  
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
 
root@bonneau-Aspire-E5-573G:~# lspci
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.3 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1d.0 USB controller: Intel Corporation Wildcat Point-LP USB EHCI Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
03:00.0 Network controller: Qualcomm Atheros Device 0042 (rev 30)
04:00.0 3D controller: NVIDIA Corporation GK208M [GeForce 920M] (rev a1)
root@bonneau-Aspire-E5-573G:~# 
Link to comment
Share on other sites

  • 0

Essayer pour vérifier que c'est bien ce périph:

dmesg | grep ath10k

Si réponse du genre:

11.203844] ath10k_pci 0000:03:00.0: pci irq msi-x interrupts 8 irq_mode 0 reset_mode 0
..............................................................................................................................................
...............................

Continuer avec...

wget https://github.com/kvalo/ath10k-firmware/archive/master.zip
unzip master.zip
sudo cp -r ath10k-firmware-master/QCA9377 /lib/firmware/ath10k/
sudo mv /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin

ou

sudo apt-get update
sudo apt-get install git
git clone https://github.com/kvalo/ath10k-firmware.git
sudo mkdir /lib/firmware/ath10k/QCA9377
sudo mkdir /lib/firmware/ath10k/QCA9377/hw1.0
cd ath10k-firmware/QCA9377/hw1.0
sudo cp * /lib/firmware/ath10k/QCA9377/hw1.0
cd /lib/firmware/ath10k/QCA9377/hw1.0
sudo mv firmware-5.bin_WLAN.TF.1.0-00267-1 firmware-5.bin

Et reboot...

Edited by nettlebay
Link to comment
Share on other sites

  • 0

Le wifi est donc un Qualcomm Atheros Device 0042.

Quelques pistes ici http://askubuntu.com/questions/708061/qualcomm-atheros-device-168c0042-rev-30-wi-fi-driver-installation

La partie intéressante semble être celle-ci:

sudo apt-get install build-essential linux-headers-$(uname -r) git
echo "options ath10k_core skip_otp=y" | sudo tee /etc/modprobe.d/ath10k_core.conf
wget https://www.kernel.org/pub/linux/kernel/projects/backports/stable/v4.4.2/backports-4.4.2-1.tar.gz
tar -zxvf backports-4.4.2-1.tar.gz
cd backport-4.4.2-1
make defconfig-wifi
make
sudo make install
git clone https://github.com/kvalo/ath10k-firmware.git
sudo cp -r ath10k-firmware/QCA9377 /lib/firmware/ath10k/
sudo cp /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin_WLAN.TF.1.0-00267-1 /lib/firmware/ath10k/QCA9377/hw1.0/firmware-5.bin

Tiens nous au courant

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...