Jump to content
ElementaryOS France
  • 0

Lenteur mortifère de loki


Question

Bonjour,

J'aurai plusieurs problème à régler avec loki mais je vais commencer par le plus agaçant : il se traîne comme un escargot neurasthénique  :angry: . Toute action, tout "clic" prend au moins 5 secondes avant que quelque chose ne se produise. Cliquer sur un des raccourcis du dock génère au mieux une élévation de l’icône qui se fige en position haute (sinon rien) et, quelques longues secondes plus tard, l'application daigne s'ouvrir. Quant à écrire du texte, il vaut mieux le faire en état de zénitude profonde et en ayant beaucoup de temps devant soi, les lettres s'affichant par à-coups et avec un retard considérable sur la frappe, de quoi aller boire une bonne bière entre 2 phrases (mais c'est peu-être pas très bon en terme de santé :wacko: ).

Je possède un vieux Dell Inspiron 640m sur lequel j'ai installé ubuntu 16.04 et elementary os loki (en remplacement de manjaro). Jusqu'à présent, je n'ai jamais eu ce type de problème avec les différentes distributions linux installées et au moment où j'écris ce message sur ubuntu, celà se passe de manière fluide.

Quand je suis sur loki, le ou les ventilateurs entrent assez rapidement en action avant même l'ouverture d'une quelconque application, le PC chauffant pas mal. Ceci n'est pas vrai avec ubuntu. J'ai installé un gestionnaire de tâches afin de surveiller l'usage du processeur et de la mémoire mais ceux-ci restent à 50% de leur capacité, alors que je m'attendais à ce qu'ils soient à 100% par rapport au problème rencontré.

Voilà l'exposé du problème. Si quelqu'un a une piste pour le solutionner, je suis preneur car, en l'état, je ne pourrais pas conserver cet os.

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0

Nikos,

 

Merci de te pencher sur mon problème.

Voici le contenu du fichier demandé :

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-43-generic (buildd@lgw01-22) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #63-Ubuntu SMP Wed Oct 12 13:48:03 UTC 2016 (Ubuntu 4.4.0-43.63-generic 4.4.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=919ad7a3-7e63-4532-8513-3c2373db1f96 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f6d33ff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f6d3400-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f4006fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f4008000-0x00000000f400bfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Dell Inc. MXC061                          /0MG532, BIOS A10 04/02/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f6d3 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2040MB, range: 8MB, type UC
[    0.000000] reg 2, base: 2039MB, range: 1MB, type UC
[    0.000000] total RAM covered: 2039M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 16M     num_reg: 3      lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2039MB, range: 1MB, type UC
[    0.000000] reg 2, base: 2040MB, range: 8MB, type UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x02201000, 0x02201fff] PGTABLE
[    0.000000] BRK [0x02202000, 0x02202fff] PGTABLE
[    0.000000] BRK [0x02203000, 0x02203fff] PGTABLE
[    0.000000] BRK [0x02204000, 0x02204fff] PGTABLE
[    0.000000] BRK [0x02205000, 0x02205fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33804000-0x35bf9fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FC1D0 000014 (v00 DELL  )
[    0.000000] ACPI: RSDT 0x000000007F6D3A0F 000040 (v01 DELL   M07      27D70402 ASL  00000061)
[    0.000000] ACPI: FACP 0x000000007F6D4800 000074 (v01 DELL   M07      27D70402 ASL  00000061)
[    0.000000] ACPI: DSDT 0x000000007F6D5400 00438C (v01 INT430 SYSFexxx 00001001 INTL 20050624)
[    0.000000] ACPI: FACS 0x000000007F6E3C00 000040
[    0.000000] ACPI: HPET 0x000000007F6D4F00 000038 (v01 DELL   M07      00000001 ASL  00000061)
[    0.000000] ACPI: APIC 0x000000007F6D5000 000068 (v01 DELL   M07      27D70402 ASL  00000047)
[    0.000000] ACPI: MCFG 0x000000007F6D4FC0 00003E (v16 DELL   M07      27D70402 ASL  00000061)
[    0.000000] ACPI: SLIC 0x000000007F6D509C 000176 (v01 DELL   M07      27D70402 ASL  00000061)
[    0.000000] ACPI: BOOT 0x000000007F6D4BC0 000028 (v01 DELL   M07      27D70402 ASL  00000061)
[    0.000000] ACPI: SSDT 0x000000007F6D3A4F 0004DC (v01 PmRef  CpuPm    00003000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f6d2fff]
[    0.000000] NODE_DATA(0) allocated [mem 0x7f6ce000-0x7f6d2fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000007f6d2fff]
[    0.000000]   Normal   empty
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007f6d2fff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f6d2fff]
[    0.000000] On node 0 totalpages: 521841
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8092 pages used for memmap
[    0.000000]   DMA32 zone: 517843 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0x7f800000-0x7fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff88007f400000 s98008 r8192 d28968 u1048576
[    0.000000] pcpu-alloc: s98008 r8192 d28968 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 513664
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-43-generic root=UUID=919ad7a3-7e63-4532-8513-3c2373db1f96 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 1998692K/2087364K available (8409K kernel code, 1283K rwdata, 3944K rodata, 1480K init, 1292K bss, 88672K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 64.
[    0.000000]     RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:16640 nr_irqs:440 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1830.739 MHz processor
[    0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3661.47 BogoMIPS (lpj=7322956)
[    0.004022] pid_max: default: 32768 minimum: 301
[    0.004031] ACPI: Core revision 20150930
[    0.009262] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.009300] Security Framework initialized
[    0.009304] Yama: becoming mindful.
[    0.009332] AppArmor: AppArmor initialized
[    0.009603] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.010835] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.011734] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.011741] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.012219] Initializing cgroup subsys io
[    0.012228] Initializing cgroup subsys memory
[    0.012245] Initializing cgroup subsys devices
[    0.012251] Initializing cgroup subsys freezer
[    0.012257] Initializing cgroup subsys net_cls
[    0.012262] Initializing cgroup subsys perf_event
[    0.012267] Initializing cgroup subsys net_prio
[    0.012274] Initializing cgroup subsys hugetlb
[    0.012278] Initializing cgroup subsys pids
[    0.012312] CPU: Physical Processor ID: 0
[    0.012314] CPU: Processor Core ID: 0
[    0.012318] mce: CPU supports 6 MCE banks
[    0.012330] CPU0: Thermal monitoring enabled (TM2)
[    0.012336] process: using mwait in idle threads
[    0.012344] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.012347] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.012806] Freeing SMP alternatives memory: 32K (ffffffff820b4000 - ffffffff820bc000)
[    0.016007] ftrace: allocating 32007 entries in 126 pages
[    0.028177] smpboot: Max logical packages: 1
[    0.028183] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.028672] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.072000] smpboot: CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.072000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.072000] core: PEBS disabled due to CPU errata
[    0.072000] ... version:                2
[    0.072000] ... bit width:              40
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             000000ffffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   3
[    0.072000] ... event mask:             0000000700000003
[    0.072000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.072000] x86: Booting SMP configuration:
[    0.072000] .... node  #0, CPUs:      #1
[    0.072000] TSC synchronization [CPU#0 -> CPU#1]:
[    0.072000] Measured 3479974014 cycles TSC warp between CPUs, turning off TSC clock.
[    0.072000] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[    0.072107] x86: Booted up 1 node, 2 CPUs
[    0.072113] smpboot: Total of 2 processors activated (7322.95 BogoMIPS)
[    0.073587] devtmpfs: initialized
[    0.077813] evm: security.selinux
[    0.077816] evm: security.SMACK64
[    0.077818] evm: security.SMACK64EXEC
[    0.077819] evm: security.SMACK64TRANSMUTE
[    0.077821] evm: security.SMACK64MMAP
[    0.077823] evm: security.ima
[    0.077824] evm: security.capability
[    0.077871] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.077871] pinctrl core: initialized pinctrl subsystem
[    0.077871] RTC time: 14:53:32, date: 10/15/16
[    0.077871] NET: Registered protocol family 16
[    0.088006] cpuidle: using governor ladder
[    0.100004] cpuidle: using governor menu
[    0.100011] PCCT header not found.
[    0.100065] Simple Boot Flag at 0x79 set to 0x80
[    0.100104] ACPI: bus type PCI registered
[    0.100107] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.100218] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.100222] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.100229] PCI: Using configuration type 1 for base access
[    0.100238] dmi type 0xB1 record - unknown flag
[    0.112135] ACPI: Added _OSI(Module Device)
[    0.112139] ACPI: Added _OSI(Processor Device)
[    0.112142] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.112144] ACPI: Added _OSI(Processor Aggregator Device)
[    0.118356] ACPI: Dynamic OEM Table Load:
[    0.118365] ACPI: SSDT 0xFFFF88007C201C00 000202 (v01 PmRef  Cpu0Ist  00003000 INTL 20050624)
[    0.118721] ACPI: Dynamic OEM Table Load:
[    0.118728] ACPI: SSDT 0xFFFF88007C205A00 0001C6 (v01 PmRef  Cpu0Cst  00003001 INTL 20050624)
[    0.119219] ACPI: Dynamic OEM Table Load:
[    0.119226] ACPI: SSDT 0xFFFF88007C162700 0000C4 (v01 PmRef  Cpu1Ist  00003000 INTL 20050624)
[    0.119547] ACPI: Dynamic OEM Table Load:
[    0.119553] ACPI: SSDT 0xFFFF88007C169240 000085 (v01 PmRef  Cpu1Cst  00003000 INTL 20050624)
[    0.119968] ACPI: Interpreter enabled
[    0.119976] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.119982] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.120007] ACPI: (supports S0 S3 S4 S5)
[    0.120010] ACPI: Using IOAPIC for interrupt routing
[    0.120043] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157090] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.157099] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.157106] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.157118] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.164003] PCI host bridge to bus 0000:00
[    0.164008] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.164012] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.164015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.164018] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.164021] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff window]
[    0.164024] pci_bus 0000:00: root bus resource [mem 0xf4007000-0xf4007fff window]
[    0.164027] pci_bus 0000:00: root bus resource [mem 0xf400c000-0xfebfffff window]
[    0.164030] pci_bus 0000:00: root bus resource [mem 0xfec10000-0xfecfffff window]
[    0.164033] pci_bus 0000:00: root bus resource [mem 0xfed00400-0xfed1ffff window]
[    0.164036] pci_bus 0000:00: root bus resource [mem 0xfee10000-0xffafffff window]
[    0.164039] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.164052] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.164196] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.164215] pci 0000:00:02.0: reg 0x10: [mem 0xeff00000-0xeff7ffff]
[    0.164223] pci 0000:00:02.0: reg 0x14: [io  0xeff8-0xefff]
[    0.164231] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref]
[    0.164239] pci 0000:00:02.0: reg 0x1c: [mem 0xefec0000-0xefefffff]
[    0.164370] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.164386] pci 0000:00:02.1: reg 0x10: [mem 0xeff80000-0xefffffff]
[    0.164586] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.164629] pci 0000:00:1b.0: reg 0x10: [mem 0xefebc000-0xefebffff 64bit]
[    0.164731] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.164796] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.164870] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.164989] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.165054] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.165126] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.165245] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.165310] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.165385] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.165505] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.165570] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.165645] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.165708] pci 0000:00:1d.0: reg 0x20: [io  0xbf80-0xbf9f]
[    0.167889] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.167959] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.168028] pci 0000:00:1d.1: reg 0x20: [io  0xbf60-0xbf7f]
[    0.170204] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.170273] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.170337] pci 0000:00:1d.2: reg 0x20: [io  0xbf40-0xbf5f]
[    0.172335] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.172406] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.172469] pci 0000:00:1d.3: reg 0x20: [io  0xbf20-0xbf3f]
[    0.174644] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.174724] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.174761] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80000-0xffa803ff]
[    0.174861] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.177255] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.177328] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.177459] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.177532] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.177665] pci 0000:00:1f.0: can't claim BAR 13 [io  0x1000-0x107f]: address conflict with ACPI CPU throttle [io  0x1010-0x1015]
[    0.177673] pci 0000:00:1f.0: quirk: [io  0x1080-0x10bf] claimed by ICH6 GPIO
[    0.177678] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
[    0.177685] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
[    0.177825] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[    0.177856] pci 0000:00:1f.2: reg 0x10: [io  0x01f0-0x01f7]
[    0.177870] pci 0000:00:1f.2: reg 0x14: [io  0x03f4-0x03f7]
[    0.177883] pci 0000:00:1f.2: reg 0x18: [io  0x0170-0x0177]
[    0.177896] pci 0000:00:1f.2: reg 0x1c: [io  0x0374-0x0377]
[    0.177910] pci 0000:00:1f.2: reg 0x20: [io  0xbfa0-0xbfaf]
[    0.177938] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.177941] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.177944] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.177947] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.177974] pci 0000:00:1f.2: PME# supported from D3hot
[    0.178092] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.178174] pci 0000:00:1f.3: reg 0x20: [io  0x10c0-0x10df]
[    0.178394] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.178590] pci 0000:0c:00.0: [8086:4222] type 00 class 0x028000
[    0.178718] pci 0000:0c:00.0: reg 0x10: [mem 0xefdff000-0xefdfffff]
[    0.179105] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[    0.179264] pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.179294] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.179304] pci 0000:00:1c.1:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.179421] acpiphp: Slot [1] registered
[    0.179430] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.179435] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.179441] pci 0000:00:1c.3:   bridge window [mem 0xefa00000-0xefcfffff]
[    0.179450] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.179537] pci 0000:02:00.0: [14e4:170c] type 00 class 0x020000
[    0.179569] pci 0000:02:00.0: reg 0x10: [mem 0xef9fe000-0xef9fffff]
[    0.179664] pci 0000:02:00.0: supports D1 D2
[    0.179667] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.179751] pci 0000:02:01.0: [1180:0832] type 00 class 0x0c0010
[    0.179776] pci 0000:02:01.0: proprietary Ricoh MMC controller disabled (via firewire function)
[    0.179779] pci 0000:02:01.0: MMC cards are now supported by standard SDHCI controller
[    0.179797] pci 0000:02:01.0: reg 0x10: [mem 0xef9fd800-0xef9fdfff]
[    0.179896] pci 0000:02:01.0: supports D1 D2
[    0.179899] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.179991] pci 0000:02:01.1: [1180:0822] type 00 class 0x080501
[    0.180027] pci 0000:02:01.1: reg 0x10: [mem 0xef9fd400-0xef9fd4ff]
[    0.180128] pci 0000:02:01.1: supports D1 D2
[    0.180131] pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180219] pci 0000:02:01.2: [1180:0592] type 00 class 0x088000
[    0.180253] pci 0000:02:01.2: reg 0x10: [mem 0xef9fd600-0xef9fd6ff]
[    0.180352] pci 0000:02:01.2: supports D1 D2
[    0.180354] pci 0000:02:01.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180438] pci 0000:02:01.3: [1180:0852] type 00 class 0x088000
[    0.180471] pci 0000:02:01.3: reg 0x10: [mem 0xef9fd700-0xef9fd7ff]
[    0.180571] pci 0000:02:01.3: supports D1 D2
[    0.180573] pci 0000:02:01.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180713] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.180722] pci 0000:00:1e.0:   bridge window [mem 0xef900000-0xef9fffff]
[    0.180732] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.180735] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.180738] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.180741] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.180744] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xefffffff window] (subtractive decode)
[    0.180747] pci 0000:00:1e.0:   bridge window [mem 0xf4007000-0xf4007fff window] (subtractive decode)
[    0.180751] pci 0000:00:1e.0:   bridge window [mem 0xf400c000-0xfebfffff window] (subtractive decode)
[    0.180754] pci 0000:00:1e.0:   bridge window [mem 0xfec10000-0xfecfffff window] (subtractive decode)
[    0.180757] pci 0000:00:1e.0:   bridge window [mem 0xfed00400-0xfed1ffff window] (subtractive decode)
[    0.180760] pci 0000:00:1e.0:   bridge window [mem 0xfee10000-0xffafffff window] (subtractive decode)
[    0.181179] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[    0.181283] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[    0.181384] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
[    0.181485] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[    0.181586] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.181690] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.181794] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[    0.181898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.182023] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.183220] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.183220] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.183220] vgaarb: loaded
[    0.183220] vgaarb: bridge control possible 0000:00:02.0
[    0.183220] SCSI subsystem initialized
[    0.183220] libata version 3.00 loaded.
[    0.183220] ACPI: bus type USB registered
[    0.183220] usbcore: registered new interface driver usbfs
[    0.183220] usbcore: registered new interface driver hub
[    0.183220] usbcore: registered new device driver usb
[    0.184049] PCI: Using ACPI for IRQ routing
[    0.186714] PCI: pci_cache_line_size set to 64 bytes
[    0.186803] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.186806] e820: reserve RAM buffer [mem 0x7f6d3400-0x7fffffff]
[    0.186992] NetLabel: Initializing
[    0.186994] NetLabel:  domain hash size = 128
[    0.186996] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.187016] NetLabel:  unlabeled traffic allowed by default
[    0.187050] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.187050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.187050] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.189016] amd_nb: Cannot enumerate AMD northbridges
[    0.189016] clocksource: Switched to clocksource hpet
[    0.200805] AppArmor: AppArmor Filesystem Enabled
[    0.200944] pnp: PnP ACPI init
[    0.212198] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[    0.212203] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[    0.212207] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.212210] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.212214] system 00:00: [mem 0x00100000-0x7f6d33ff] could not be reserved
[    0.212217] system 00:00: [mem 0x7f6d3400-0x7f6fffff] has been reserved
[    0.212220] system 00:00: [mem 0x7f700000-0x7f7fffff] has been reserved
[    0.212224] system 00:00: [mem 0x7f700000-0x7fefffff] could not be reserved
[    0.212227] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[    0.212231] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.212234] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.212238] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[    0.212241] system 00:00: [mem 0xffa80000-0xffa83fff] could not be reserved
[    0.212244] system 00:00: [mem 0xf4000000-0xf4003fff] has been reserved
[    0.212248] system 00:00: [mem 0xf4004000-0xf4004fff] has been reserved
[    0.212251] system 00:00: [mem 0xf4005000-0xf4005fff] has been reserved
[    0.212254] system 00:00: [mem 0xf4006000-0xf4006fff] has been reserved
[    0.212257] system 00:00: [mem 0xf4008000-0xf400bfff] has been reserved
[    0.212261] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.212267] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.212351] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.212355] system 00:01: [io  0x1000-0x1005] has been reserved
[    0.212358] system 00:01: [io  0x1008-0x100f] has been reserved
[    0.212363] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.212437] system 00:02: [io  0xf400-0xf4fe] has been reserved
[    0.212441] system 00:02: [io  0x1006-0x1007] has been reserved
[    0.212445] system 00:02: [io  0x100a-0x1059] could not be reserved
[    0.212448] system 00:02: [io  0x1060-0x107f] has been reserved
[    0.212451] system 00:02: [io  0x1080-0x10bf] has been reserved
[    0.212454] system 00:02: [io  0x10c0-0x10df] has been reserved
[    0.212458] system 00:02: [io  0x1010-0x102f] could not be reserved
[    0.212461] system 00:02: [io  0x0809] has been reserved
[    0.212466] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.212528] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.212580] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.212634] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.212703] system 00:06: [io  0x0c80-0x0cff] could not be reserved
[    0.212707] system 00:06: [io  0x0910-0x091f] has been reserved
[    0.212710] system 00:06: [io  0x0920-0x092f] has been reserved
[    0.212713] system 00:06: [io  0x0cb0-0x0cbf] has been reserved
[    0.212717] system 00:06: [io  0x0930-0x097f] has been reserved
[    0.212721] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.212830] system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.212836] system 00:07: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.213143] pnp: PnP ACPI: found 8 devices
[    0.221592] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.221622] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 0b] add_size 1000
[    0.221627] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000 add_align 100000
[    0.221632] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 0b] add_size 200000 add_align 100000
[    0.221645] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 0c] add_size 1000
[    0.221652] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0c] add_size 200000 add_align 100000
[    0.221680] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.221685] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.221689] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.221693] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.221697] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.221700] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.221704] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.221707] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.221710] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.221713] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.221717] pci 0000:00:1c.1: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.221725] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.221734] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.221742] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.221746] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.221750] pci 0000:00:1c.1: BAR 13: assigned [io  0x3000-0x3fff]
[    0.221756] pci 0000:00:1c.0: PCI bridge to [bus 0b]
[    0.221760] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.221768] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.221774] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.221783] pci 0000:00:1c.1: PCI bridge to [bus 0c]
[    0.221787] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.221795] pci 0000:00:1c.1:   bridge window [mem 0xefd00000-0xefdfffff]
[    0.221801] pci 0000:00:1c.1:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.221810] pci 0000:00:1c.3: PCI bridge to [bus 0d-0e]
[    0.221814] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.221821] pci 0000:00:1c.3:   bridge window [mem 0xefa00000-0xefcfffff]
[    0.221827] pci 0000:00:1c.3:   bridge window [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.221837] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.221845] pci 0000:00:1e.0:   bridge window [mem 0xef900000-0xef9fffff]
[    0.221858] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.221861] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.221864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.221867] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.221870] pci_bus 0000:00: resource 8 [mem 0x80000000-0xefffffff window]
[    0.221873] pci_bus 0000:00: resource 9 [mem 0xf4007000-0xf4007fff window]
[    0.221876] pci_bus 0000:00: resource 10 [mem 0xf400c000-0xfebfffff window]
[    0.221879] pci_bus 0000:00: resource 11 [mem 0xfec10000-0xfecfffff window]
[    0.221882] pci_bus 0000:00: resource 12 [mem 0xfed00400-0xfed1ffff window]
[    0.221885] pci_bus 0000:00: resource 13 [mem 0xfee10000-0xffafffff window]
[    0.221888] pci_bus 0000:0b: resource 0 [io  0x2000-0x2fff]
[    0.221891] pci_bus 0000:0b: resource 1 [mem 0x80000000-0x801fffff]
[    0.221894] pci_bus 0000:0b: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.221897] pci_bus 0000:0c: resource 0 [io  0x3000-0x3fff]
[    0.221900] pci_bus 0000:0c: resource 1 [mem 0xefd00000-0xefdfffff]
[    0.221903] pci_bus 0000:0c: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.221906] pci_bus 0000:0d: resource 0 [io  0xd000-0xdfff]
[    0.221909] pci_bus 0000:0d: resource 1 [mem 0xefa00000-0xefcfffff]
[    0.221912] pci_bus 0000:0d: resource 2 [mem 0xe0000000-0xe01fffff 64bit pref]
[    0.221915] pci_bus 0000:02: resource 1 [mem 0xef900000-0xef9fffff]
[    0.221918] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.221921] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.221924] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.221927] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.221930] pci_bus 0000:02: resource 8 [mem 0x80000000-0xefffffff window]
[    0.221933] pci_bus 0000:02: resource 9 [mem 0xf4007000-0xf4007fff window]
[    0.221936] pci_bus 0000:02: resource 10 [mem 0xf400c000-0xfebfffff window]
[    0.221939] pci_bus 0000:02: resource 11 [mem 0xfec10000-0xfecfffff window]
[    0.221942] pci_bus 0000:02: resource 12 [mem 0xfed00400-0xfed1ffff window]
[    0.221945] pci_bus 0000:02: resource 13 [mem 0xfee10000-0xffafffff window]
[    0.222001] NET: Registered protocol family 2
[    0.222278] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.222369] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.222498] TCP: Hash tables configured (established 16384 bind 16384)
[    0.222561] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.222580] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.222650] NET: Registered protocol family 1
[    0.222675] pci 0000:00:02.0: Video device with shadowed ROM
[    0.224197] PCI: CLS 64 bytes, default 64
[    0.224280] Trying to unpack rootfs image as initramfs...
[    1.100590] Freeing initrd memory: 36824K (ffff880033804000 - ffff880035bfa000)
[    1.100804] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1a63979120b, max_idle_ns: 440795247893 ns
[    1.100948] Scanning for low memory corruption every 60 seconds
[    1.101507] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.101559] audit: initializing netlink subsys (disabled)
[    1.101598] audit: type=2000 audit(1476543212.100:1): initialized
[    1.102124] Initialise system trusted keyring
[    1.102336] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.105354] zbud: loaded
[    1.105646] VFS: Disk quotas dquot_6.6.0
[    1.105707] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.106205] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.106654] fuse init (API version 7.23)
[    1.106902] Key type big_key registered
[    1.106930] Allocating IMA MOK and blacklist keyrings.
[    1.107681] Key type asymmetric registered
[    1.107686] Asymmetric key parser 'x509' registered
[    1.107751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.107804] io scheduler noop registered
[    1.107808] io scheduler deadline registered (default)
[    1.107865] io scheduler cfq registered
[    1.108975] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.108990] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.109044] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.109046] vesafb: scrolling: redraw
[    1.109049] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.109070] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000400000, using 3072k, total 3072k
[    1.109230] Console: switching to colour frame buffer device 128x48
[    1.109260] fb0: VESA VGA frame buffer device
[    1.109289] intel_idle: does not run on family 6 model 15
[    1.109882] ACPI: AC Adapter [AC] (on-line)
[    1.110004] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.110508] ACPI: Lid Switch [LID]
[    1.110576] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    1.110580] ACPI: Power Button [PBTN]
[    1.110645] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.110649] ACPI: Sleep Button [SBTN]
[    1.110777] ACPI: acpi_idle registered with cpuidle
[    1.118901] thermal LNXTHERM:00: registered as thermal_zone0
[    1.118905] ACPI: Thermal Zone [THM] (71 C)
[    1.118954] GHES: HEST is not enabled!
[    1.120833] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.140205] Linux agpgart interface v0.103
[    1.140657] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.140679] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.141384] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.141899] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.150007] ACPI: Battery Slot [BAT0] (battery present)
[    1.152911] brd: module loaded
[    1.155160] loop: module loaded
[    1.155418] ata_piix 0000:00:1f.2: version 2.13
[    1.155613] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    1.156658] scsi host0: ata_piix
[    1.157026] scsi host1: ata_piix
[    1.157093] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[    1.157096] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[    1.157252] libphy: Fixed MDIO Bus: probed
[    1.157256] tun: Universal TUN/TAP device driver, 1.6
[    1.157258] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.157332] PPP generic driver version 2.4.2
[    1.157461] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.157469] ehci-pci: EHCI PCI platform driver
[    1.157683] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.157693] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.157711] ehci-pci 0000:00:1d.7: debug port 1
[    1.161641] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.161657] ehci-pci 0000:00:1d.7: irq 20, io mem 0xffa80000
[    1.176103] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.176205] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.176212] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.176217] usb usb1: Product: EHCI Host Controller
[    1.176223] usb usb1: Manufacturer: Linux 4.4.0-43-generic ehci_hcd
[    1.176228] usb usb1: SerialNumber: 0000:00:1d.7
[    1.176531] hub 1-0:1.0: USB hub found
[    1.176543] hub 1-0:1.0: 8 ports detected
[    1.177006] ehci-platform: EHCI generic platform driver
[    1.177028] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.177035] ohci-pci: OHCI PCI platform driver
[    1.177054] ohci-platform: OHCI generic platform driver
[    1.177068] uhci_hcd: USB Universal Host Controller Interface driver
[    1.177237] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.177247] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.177257] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.177282] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
[    1.177348] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.177352] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.177355] usb usb2: Product: UHCI Host Controller
[    1.177358] usb usb2: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[    1.177361] usb usb2: SerialNumber: 0000:00:1d.0
[    1.177555] hub 2-0:1.0: USB hub found
[    1.177566] hub 2-0:1.0: 2 ports detected
[    1.177884] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.177893] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.177902] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.177936] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
[    1.177999] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.178003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.178006] usb usb3: Product: UHCI Host Controller
[    1.178008] usb usb3: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[    1.178011] usb usb3: SerialNumber: 0000:00:1d.1
[    1.178200] hub 3-0:1.0: USB hub found
[    1.178209] hub 3-0:1.0: 2 ports detected
[    1.178528] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.178537] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.178546] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.178577] uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
[    1.178639] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.178643] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.178646] usb usb4: Product: UHCI Host Controller
[    1.178649] usb usb4: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[    1.178652] usb usb4: SerialNumber: 0000:00:1d.2
[    1.178842] hub 4-0:1.0: USB hub found
[    1.178852] hub 4-0:1.0: 2 ports detected
[    1.179168] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.179177] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.179186] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.179218] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
[    1.179282] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.179286] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.179289] usb usb5: Product: UHCI Host Controller
[    1.179292] usb usb5: Manufacturer: Linux 4.4.0-43-generic uhci_hcd
[    1.179294] usb usb5: SerialNumber: 0000:00:1d.3
[    1.179480] hub 5-0:1.0: USB hub found
[    1.179490] hub 5-0:1.0: 2 ports detected
[    1.179743] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.182595] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.182602] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.182869] mousedev: PS/2 mouse device common for all mice
[    1.183208] rtc_cmos 00:05: RTC can wake from S4
[    1.183421] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.183456] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.183467] i2c /dev entries driver
[    1.183562] device-mapper: uevent: version 1.0.3
[    1.183691] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.183718] ledtrig-cpu: registered to indicate activity on CPUs
[    1.184427] NET: Registered protocol family 10
[    1.184752] NET: Registered protocol family 17
[    1.184770] Key type dns_resolver registered
[    1.185059] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[    1.185101] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[    1.185173] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.185499] registered taskstats version 1
[    1.185520] Loading compiled-in X.509 certificates
[    1.187037] Loaded X.509 cert 'Build time autogenerated kernel key: d76179dc6bbadd817ec29258d181eadabda602cb'
[    1.187064] zswap: loaded using pool lzo/zbud
[    1.187679] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.190330] Key type trusted registered
[    1.195905] Key type encrypted registered
[    1.195915] AppArmor: AppArmor sha1 policy hashing enabled
[    1.195921] ima: No TPM chip found, activating TPM-bypass!
[    1.195959] evm: HMAC attrs: 0x1
[    1.196430]   Magic number: 4:974:889
[    1.196518] ata_piix 0000:00:1f.2: hash matches
[    1.196611] rtc_cmos 00:05: setting system clock to 2016-10-15 14:53:33 UTC (1476543213)
[    1.197557] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.197560] EDD information not available.
[    1.197648] PM: Hibernation image not present or could not be loaded.
[    1.336538] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L632D, DE03, max UDMA/33
[    1.368483] ata2.00: configured for UDMA/33
[    1.412900] ata1.00: HPA detected: current 231496650, native 234441648
[    1.412910] ata1.00: ATA-7: WDC WD1200BEVS-75LAT0, 02.06M02, max UDMA/133
[    1.412916] ata1.00: 231496650 sectors, multi 8: LBA48 NCQ (depth 0/1)
[    1.428633] ata1.00: configured for UDMA/133
[    1.428934] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-7 6M02 PQ: 0 ANSI: 5
[    1.429241] sd 0:0:0:0: [sda] 231496650 512-byte logical blocks: (119 GB/110 GiB)
[    1.429305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.429340] sd 0:0:0:0: [sda] Write Protect is off
[    1.429344] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.429397] sd 0:0:0:0: [sda]%
Link to comment
Share on other sites

  • 0

Bonsoir,

 

A première lecture, je ne remarque rien d'anormale (hormis le type de cpu un peu ancien), toutefois, la partie ventilation qui tourne tout le temps n'est pas normal.

 

Pour cela, pourrais-tu, installer deux logiciels supplémentaires :

sudo apt-get install lm-sensors psensor
sudo sensors-detect

Puis après avoir répondu à la série de questions :

sudo service kmod start

Une fois cette opération réalisée, tu pourras lancer la commande :

sensors

Pour récupérer la température de ton CPU.

 

Nikos

Link to comment
Share on other sites

  • 0

Bonjour Nikos,

 

Voilà les températures relevées :

 

acpitz-virtual-0

Adapter: Virtual device
temp1:        +58.5°C  (crit = +105.0°C)
 
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +63.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +63.0°C  (high = +100.0°C, crit = +100.0°C)
 
5 mn plus tard :
 
acpitz-virtual-0
Adapter: Virtual device
temp1:        +79.5°C  (crit = +105.0°C)
 
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +78.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +78.0°C  (high = +100.0°C, crit = +100.0°C)
 
10 mn plus tard :
 
acpitz-virtual-0
Adapter: Virtual device
temp1:        +85.5°C  (crit = +105.0°C)
 
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +78.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +84.0°C  (high = +100.0°C, crit = +100.0°C)
 
et au bout d'1/4h :
 
acpitz-virtual-0
Adapter: Virtual device
temp1:        +79.5°C  (crit = +105.0°C)
 
coretemp-isa-0000
Adapter: ISA adapter
Core 0:       +79.0°C  (high = +100.0°C, crit = +100.0°C)
Core 1:       +79.0°C  (high = +100.0°C, crit = +100.0°C)
 
Finalement, les ventilateurs font leur office et il est à noter que le problème se pose dès la session ouverte, donc avant que la température ne monte.
Comme la base d'eos  est ubuntu et que ce dernier ne me pose pas de problème, il doit bien y avoir une incompatibilité quelque part, mais laquelle ? Mystère !
J'ai "hérité" d'un PC plus récent et j'y ai installé eos. Et là, pas de problème de ralentissement.
Du coup, je vais désinstaller eos de mon vieux Dell et le garder sur mon "nouveau" Fujitsu :)
Encore merci pour ton aide mais si tu veux aller plus loin dans le pourquoi du ralentissement sur le Dell, dis le moi : je peux y laisser eos encore un moment.
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...